HP 32SII Owner's Manual page 172

only program, you can press
beginning.)
3. Press and hold
you release
displayed (it is in the X–register).
To move to the preceding line, you can press
occurs.
4. The program pointer moves to the next line. Repeat step 3 until you find an
error (an incorrect result occurs) or reach the end of the program.
If Program–entry mode is active, then
the programs pointer, without executing lines. Holding down an arrow key
during program entry makes the lines roll by automatically.
Example: Testing a Program.
Step through the execution of the program labeled A. Use a radius of 5 for
the test data. Check that Program–entry mode is not active before you start:
Keys:
5 A
(hold)
(release)
(hold)
(release)
(hold)
(release)
(hold)
(release)
(hold)
(release)
12–10 Simple Programming
File name 32sii-Manual-E-0424
Printed Date : 2003/4/24
. This displays the current program line. When
, the line is executed. The result of that execution is then
Display:
Moves program counter to label A.
Squares input.
π Value of π .
25 π .
End of program. Result is correct.
Size : 17 .7 x 25.2 cm
to move to its
. No execution
or simply changes
Description: