Changing The Batteries - HP 32SII Owner's Manual

Changing the Batteries

Replace the batteries as soon as possible when the low battery annunciator
( ) appears. If the battery annunciator is on, and the display dims, you
may lose data. If data is lost, the
Once you've removed the batteries, replace them within 2 minutes to avoid
losing stored information. (Have the new batteries readily at hand before you
open the battery compartment.) Use any brand of fresh I.E.C LR44 (or
manufacturer's equivalent) button–cell batteries.
Equivalent 1.5–volt, button–cell batteries you might find from various
manufacturers are LR44, A76, V13GA, KA76, 357, SP357, V357, and
SR44W.
1. Have three fresh button–cell batteries at hand. Avoid touching the battery
terminals — handle batteries only by their edges.
2. Make sure the calculator is OFF. Do not press ON (
until the entire battery–changing procedure is completed.
If the calculator is ON when the batteries are removed,
the contents of Continuous Memory will be erased.
3. Remove the battery–compartment door by pressing down and outward on
it until the door slides off (left illustration).
4. Turn the calculator over and shake the batteries out.
Warning
5. Insert the new batteries (right illustration). Stack them according to the
diagram inside the battery compartment.
6. Replace the battery–compartment door (slide the tab on the door back
into the slot in the calculator case).
File name 32sii-Manual-E-0424
Printed Date : 2003/4/24
A - 3 p i c t u r e
Do not mutilate, puncture, or dispose of
batteries in fire. The batteries can burst or
explode, releasing hazardous chemicals.
Support, Batteries, and Service
Size : 17 .7 x 25.2 cm
message is displayed.
) again
A–3