Integrating Equations ( ∫ Fn) - HP 32SII Owner's Manual

works only with real numbers.
Integrating Equations ( ∫ FN)
To Integrating Equations:
To integrate an equation:
1. If the equation that defines the integrand's function isn't stored in the
equation list, key it in (see "Entering Equations Into the Equation List" in
chapter 6) and leave Equation mode. The equation usually contains just
an expression.
2. Enter the limits of integration: key in the lower limit and press
then key in the upper limit.
3. Display the equation: Press
the equation list (press
equation.
4. Select the variable of integration: Press
calculation.
uses far more memory than any other operation in the calculator. If
executing causes a
You can halt a running integration calculation by pressing
However, no information about the integration is available until the
calculation finishes normally
The display format setting affects the level of accuracy assumed for your
function and used for the result. The integration is more precise but takes
much longer in the {
uncertainty of the result ends up in the Y–register, pushing the limits of
integration up into the T– and Z–registers. For more information, see
"Accuracy of Integration" later in this chapter.
8–2 Integrating Equations
File name 32sii-Manual-E-0424
Printed Date : 2003/4/24
and, if necessary, scroll through
or
message, refer to appendix B.
} and higher { }, {
Size : 17 .7 x 25.2 cm
) to display the desired
variable. This starts the
or
}, and { } settings. The
,
.