HP 32SII Owner's Manual page 204

Example:
Controlling the Fraction Display.
The following program lets you exercise the calculator's fraction–display
capability. The program prompts for and uses your inputs for a fractional
number and a denominator (the /c value). The program also contains
examples of how the three fraction–display flags (7, 8, and 9) and the
"message–display" flag (10) are used.
Messages in this program are listed a MESSAGE and are entered as
equations:
1. Set Equation–entry mode by pressing
turns on).
2. Press
(the key) for each space character.
3. Press
Equation–entry mode.
Program Lines:
13–14 Programming Techniques
File name 32sii-Manual-E-0424
Printed Date : 2003/4/24
letter for each alpha character in the message; press
to insert the message in the current program line and end
Begins the fraction program.
Clears three fraction flags.
Displays messages.
Selects decimal base.
Prompts for a number.
Prompts for denominator (2 – 4095).
Displays message, then shows the decimal
number.
Sets /c value and sets flag 7.
Displays message, then shows the fraction.
Size : 17 .7 x 25.2 cm
(the EQN annunciator
Description: