# Reviewing Cash Flow Entries - HP 12C Platinum User Manual

Financial calculator.

## Reviewing Cash Flow Entries

To display a single cash flow amount, press :, then key in the number of
the register containing the cash flow amount to be displayed. Alternatively,
store the number of that cash flow amount (that is, the value of j for the CF
desired) in the n register, then press :gK.
To review all the cash flow amounts, press :g K repeatedly. This
displays the cash flow amounts in reverse order — that is, beginning with the
final cash flow and proceeding to CF
To display the number of times a cash flow amount occurs consecutively —
that is, to display the N
amount (that is, the value of j) in the n register, then press :ga.
To review all the cash flow amounts together with the number of times each
cash flow amount occurs consecutively (that is, to review each CF
pair), press :ga:gK repeatedly. This displays N
CF
beginning with the final cash flow amount and proceeding to N
j
CF
.
0
Note:
Neither fL nor fl changes the number in the n register.
However, each time :gK is pressed, the number in the n register is
decreased by 1. If this is done, or if you manually change the number in the
n register in order to display a single N
number in the n register to the total number of cash flow amounts originally
entered (not including the amount of the initial investment CF
done, NPV and IRR calculations will give incorrect results; also, a review of
cash flow entries would begin with N
currently in the n register.
For example, to display the fifth cash flow amount and the number of times that
amount occurs consecutively:
Keystrokes
:5
5n
:ga
7n
.
0
for a CF
— store the number of that cash flow
j
j
and/or CF
j
and CF
n
Display
CF
9,000.00
5
Stores the value of j in the n
5.00
register.
N
2.00
5
Resets the number in the n register
7.00
to its original value.
and N
j
followed by
j
0
, be sure to reset the
j
). If this is not
0
, where n is the number
n
79
j
j
and  