Keys That Clear - HP 32SII Owner's Manual

5. End the program with a return instruction, which sets the program pointer
back to
6. Press (or
Numbers in program lines are stored as precisely as you entered them, and
they're displayed using ALL or SCI format. (If a long number is shortened in
the display, press
To enter an equation in a program line:
1. Press
turns on.
2. Enter the equation as you would in the equation list. See chapter 6 for
details. Use
3. Press
equation does not become part of the equation list.)
After you've entered an equation, you can press
checksum and length. Hold the
For a long equation, the
for this program line. You can use
[SCRL] to turn off
instructions

Keys That Clear

Note these special conditions during program entry:
always cancels program entry. It never clears a number to zero.
If the program line doesn't contain an equation,
program line. It backspaces if a digit is being entered ("_" cursor
present).
If the program line contains an equation,
equation. It deletes the rightmost function or variable if an equation is
being entered (" " cursor present).
To program a function to clear the K–register, use
12–6 Simple Programming
File name 32sii-Manual-E-0424
Printed Date : 2003/4/24
after the program runs. Press
) to cancel program entry.
to view all digits.)
to activate Equation–entry mode, The EQN annunciator
to correct errors as you type.
to terminate the equation and display its left end. (The
and annunciators show that scrolling is active
and to use the top–row keys to enter program
{ } deletes a program lime if it contains an equation.
Size : 17 .7 x 25.2 cm
key to keep the values in the display.
and to scroll the display. Press
deletes the current
begins editing the
.
to see its
{ }.