HP 32SII Owner's Manual page 279

Yom do riot need to key in the inverse routine (in routines I and T) if you are
not interested in the inverse capability.
Program Instructions:
1. Key in the program routines; press
2. Press
3. After the prompt for M, key in the population mean and press
mean is zero, just press
4. After the prompt for S, key in the population standard deviation and press
. (If the standard deviation is 1, just press
5. To calculate X given Q(X), skip to step 9 of these instructions.
6. To calculate Q(X) given X,
7. After the prompt, key in the value of X and press
displayed.
8. To calculate Q(X) for a new X with the same mean and standard deviation,
press
9. To calculate X given Q(X), press
10. After the prompt, key in the value of Q(X) and press
displayed.
11. To calculate X for a new Q(X) with the same mean and standard deviation,
press
Variables Used:
D Dummy variable of integration.
M Population mean, default value zero.
Q Probability corresponding to the upper–tail area.
S Population standard deviation, default value of 1.
Variable used temporarily to pass the value S ×
T
inverse program.
X Input value that defines the left side of the upper–tail area.
File name 32sii-Manual-E-0424
Printed Date : 2003/4/24
S.
.)
and go to step 7 .
and go to step 10.
Size : 17 .7 x 25.2 cm
when done.
)
D.
. The result, Q(X), is
I.
Statistics Programs 16–15
. (If the
. The result, X, is
π 2
to the