Bluetooth Mode - Pinell SUPERSOUND 202 User Manual

Bluetooth mode

Prior to pairing, verify your device supports Bluetooth 4.0 and your device is not
connected to any other Bluetooth product. Devices may pair differently. Below is
a general guide.
1. Press SOURCE to select Bluetooth mode. This will power on the Bluetooth.
Turn the volume up about ¼ to start. Also turn up the volume on the source
device (the device you are streaming from).
2. Turn on the Bluetooth on your enabled device.
3. Select Bluetooth device name "Supersound 202" when it appears on your
device's screen to initiate searching.
4. You can start to play your music files wirelessly. Adjust the volume level on
your device.
You should not have to pair your device again.
Depending on your device, you may need to make multiple attempts at Pairing
and/or Connecting to the "Supersound 202", but please give your device
adequate time to Pair or Connect before repeating the process.
22