Table of Contents
Advertisement
Bluetooth Mode
Pair the unit with a Bluetooth device to listen to music:
1.
Press the MODE button to select Bluetooth mode.
2.
The display will flash in
3.
Activate your Bluetooth device and look for your radio's model number "Pinell Stereo 701" or
"Pinell Supersound III" in the Bluetooth list.
4.
Select "Pinell Stereo 701" or "Pinell Supersound III" and enter "0000" for the password if
necessary.
5.
The
icon will remain steadily on the display when connection is successful.
6.
To disconnect the Bluetooth connection, press MENU button, press
disconnect", and then press SELECT to confirm. The display will show "Device
disconnect?", press
@
Note: the unit will automatically switch to standby mode after 15 minutes if the source device is
disconnected, switched off or the volume is too close to mute.
Aux in Mode
AUX IN allows for quick and easy connection to an MP3 player or other external audio sources.
1.
Before connecting to the mains socket, use a 3.5mm audio cable (not supplied) to connect
to your external audio device through the AUX IN socket at the rear of unit.
2.
Connect power adapter to mains socket, press STANDBY button to switch unit on.
3.
Press MODE button repeatedly to select AUX In mode.
4.
In Aux in mode, you may operate your audio device directly for playback features.
5.
To gain optimal volume levels, adjusting the output volume level on the audio device as well
is recommended.
@
Note: the unit will automatically switch to standby mode after 15 minutes if the source device is
disconnected, switched off or the volume is too close to mute.
22
repeatedly.
/
to select "YES", and then press SELECT to confirm.
/
to select "BT
Advertisement
Table of Contents
