Audio Settings; Aux In Mode; Spotify Connect Mode - Pinell SUPERSOUND 202 User Manual

Audio settings

By default, all stereo stations are reproduced in stereo. For weak stations,
this may result in a poor signal-to-noise ratio (hiss). To play weak stations in
mono, select MENU > Audio setting > FM weak reception: Listen in mono only
> Yes.

AUX in mode

AUX in mode plays audio from an external source such as an MP3 player.
To play audio with AUX in mode,
1. Connect the external audio source to the AUX IN 3.5 mm stereo socket.
2. Either press SOURCE until the display shows AUX in or select MENU >
Main Menu > AUX in.
3. Adjust the volume of Supersound 202 (and, if necessary, the audio source
device) as required.

Spotify Connect mode

Your radio has Spotify Connect built in. Press SOURCE to select Spotify mode.
Use your phone, tablet or computer as a remote control for Spotify.
Go to spotify.com/connect to learn how.
The Spotify software is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses
21