Safety instructions Please store this instruction manual for future reference. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
Table of Contents Safety instructions .......................... 2 Table of Contents ..........................3 Features ..........................4 Carton contents ........................4 Controls, connectors and display ....................5 Getting started ..........................6 Preset stations ........................7 Recall stations ........................7 Charging the battery ....................... 7 DAB radio mode ..........................
FM with RDS (Radio Data System) Carton contents Carefully remove your radio from the packaging. You can keep the packaging for later use: • 1x Pinell Supersound MICRO unit • 1x USB cable • Quick start guide (printed on the packaging)
Controls, connectors and display Press and hold to power on, press it briefly to power off. ▲ - Enter the station list after scan - Scroll up on the menu list - Every press of the button will scan the frequency downward by 0.05MHz - Press and hold the button for 2 seconds, the radio screen will display 'Scanning', it stops to scan until it reaches next upward available station, and starts to play...
15 USB port for charging internal battery 16 Earphone socket Getting started Supersound MICRO is easy to use. To play DAB or FM radio, all you need is a power source (built-in rechargeable battery or USB power). Quick setup Fully extend the Telescopic antenna to ensure good reception in both DAB and FM Radio modes.
Press to power the Supersound MICRO On (short press), Standby (short press) or Off (long press). Note: Unplug the USB power to turn off your Supersound MICRO completely. FM/DAB: Press repeatedly to cycle through the sources: DAB, FM. Preset stations You can store up to 20 DAB presets and 20 FM presets.
DAB radio mode DAB radio mode receives DAB/DAB+ digital radio and displays information about the station, stream and track playing. The menu options are: Full scan, Manual tune, DRC, Prune, System. Selecting stations To listen to or change a station, press >...
To find a station, press and hold . The frequency display starts to run as ▲/▼ Supersound MICRO scans the FM band. Scan settings This enables you set FM scans to stop at stations with strong signal or stop at any available station.
System The System menu options are: Alarms, SW version, Factory Reset, Language, Time, Sleep. Sleep When listening to the radio you can set a period of time before the radio enters “standby” mode. Note: the radio must be active and not in “standby” mode already.
Language This feature enables you to change menu language. Long press / M > > System > OK > > Language ▲/▼ ▲/▼ > OK > select your language > OK to confirm. Factory Reset This function clears all user defined settings, replacing them with the original default values, so time/date, preferences/settings, station list and preset stations are all lost.
RoHS directives. The declaration of conformity can be found here: www.pinell.com/certificates * Information in this manual is subject to change without notice. Pinell is a label of TT Micro AS (www.ttmicro.no) Olav Helsets vei 5, 0694 Oslo, Norway (Email: Support@pinell.no)