Tesla MODEL X 2015 Owner's Manual page 37

WARNING: Before driving after installing a child seat in the second row, ensure that a "seat unlocked" warning
does NOT display on the touchscreen or instrument panel. This warning indicates that the seat is unsafe for an
occupant because it was not returned to its safe, locked position. If the touchscreen or instrument panel
displays the warning message, move the seat or backrest slightly forward or backward until it locks firmly into
position and the message no longer displays.
Recommended Child Restraint Systems
In the table below, Tesla provides recommended child restraint systems based a child's weight group (as defined in
ECE R44 "Uniform Provisions Concerning Restraining Devices for Child Occupants"). Although all weight groups can
occupy any passenger seat in Model X, the type of child restraint system that can be used in each seat can vary. For
example, only belt-based child restraint systems (as defined in
in the rear center passenger seat.
Weight Group Child Weight
Group 0 Up to 10 kg
Group 0+ Up to 13 kg
Group I 9 to 18 kg
Group II 15 to 25 kg
Group III 22 to 36 kg
Seating Larger Children
If a child is too large to fit into a child restraint system, but too small to be safely secured using the vehicle's seat
belts, use a booster seat appropriate for the child's age and size. For children needing a booster seat, Tesla
recommends using the base of the Peg Perego Viaggio 2-3 Shuttle. When using and installing a booster seat,
carefully follow the instructions provided by the manufacturer.
Two Installation Methods
NOTE: Always install child restraint systems by following the instructions provided by the manufacturer of the child
restraint system.
Among many other variants, there are two general types of child restraint systems based on how they are secured in
the seat:
• Belt-based - secured using the vehicle's seat belts (see
47).
• ISOFIX/i-Size- secured to anchor bars built into the vehicle's seats (see
on page 47).
Some child restraint systems can be installed using either method. Refer to the instructions provided by the
manufacturer of the child restraint system to determine which installation method to use and for detailed installation
instructions.
In Model X, belt-based child restraints can be installed in any passenger seat and ISOFIX/i-Size systems can be
installed in either of the second row outboard seats. Specific details about the type of child restraint system that can
be used in each seat is provided next.
Seating and Safety Restraints
Seating Children Safely
Two Installation Methods on page
Tesla Recommended
No recommendation
Maxi-Cosi CabrioFix with
Easybase2, or FamilyFix
Britax Römer DUO PLUS
2
Britax KIDFIX R
2
Britax KIDFIX R, Peg Perego Viaggio 2-3 Shuttle Base
Installing Belt-based Child Restraint Systems on page
35) can be used
Installing ISOFIX Child Restraint Systems
35