Tesla MODEL X 2015 Owner's Manual page 247

You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can
be located through the map on your vehicle's touchscreen display. See
details. Additional third-party charging stations may also be available in your area to help you to pinpoint the issue.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's
Owner's Manual at Charging & Adapter Product
manufacturer's provided documentation for troubleshooting tips.
(CHG_u005)
Unable to charge - Charge station not powered
Check power source or try a different station
Charging cannot begin because the charging equipment is not ready. A charge handle is detected, but the charging
station is not communicating with the vehicle. This issue could occur because:
• The charging station is not powered.
• The control pilot signal between the charging station and the vehicle is interrupted.
Try charging the vehicle with different charging equipment or at a different charging station.
If the vehicle starts to charge, the issue was likely with the equipment.
If using a Mobile Connector or Wall Connector, first check the status lights on the front. If no status lights are visible,
check the power source and contact an electrician to inspect the building wiring connection to the wall outlet or the
Wall Connector to confirm that all wires are properly connected and torqued.
If using other external charging equipment, consult the product's owner's manual to learn how to confirm that the
station is powered. Contact an electrician to inspect the building wiring and charging equipment as necessary.
If the vehicle still does not charge, the issue may be with the vehicle.
As this alert is usually specific to external charging equipment and power sources, and it does not typically indicate
an issue with your vehicle that can be resolved by scheduling service, it is recommended that you:
• Try charging with different charge equipment / at different stations.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can
be located through the map on your vehicle's touchscreen display. See
details. Additional third-party charging stations may also be available in your area to help you to pinpoint the issue.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's
Owner's Manual at Charging & Adapter Product
manufacturer's provided documentation for troubleshooting tips.
(CHG_u006)
Charge port latch not engaged
Fully insert charge cable or check for obstruction
The charge port latch is unable to latch the charge cable in the charge port inlet. If the latch is not engaged, AC
charging (for example, charging with a Mobile Connector or Wall Connector) will be limited to 16A and DC Fast
Charging / Supercharging will be unavailable.
Try re-inserting the charge cable fully into the charge port inlet.
If your vehicle begins charging and the charge port light pulses green, the charge cable may not have been fully
inserted before. The latch may not have engaged during previous attempts because the cable was not fully inserted.
AC charging should no longer be limited, and DC Fast Charging / Supercharging should be available.
Consumer Information
Troubleshooting Alerts
Maps and Navigation on page 146
Guides. If using other external charging equipment, refer to the
Maps and Navigation on page 146
Guides. If using other external charging equipment, refer to the
for more
for more
245