Electrical And Power Source Related - Cybernet CyberMed S22 User Manual

uneven surfaces may cause the cart to overturn or fall.
2. If the S unit is dropped, immediately turn the power off, disconnect the cords, and
contact a service technician for repairs. Continual use of the system after a
damaging drop may result in a fire or electric shock. Also, do not repair the unit
on your own.
3. Having two or more people transporting and/or installing the system is
recommended.
4. Before suspending the unit, make sure the material used for suspension is sturdy
and stable. If not properly suspended, the system may fall and cause serious
injury to people standing nearby as well as to the unit itself.
5. If the user wishes to mount the S unit, remember to only use mounting hardware
recommended by the manufacturer.

Electrical and Power Source Related

▪ The S unit can be operated with the included external power adapter with AC
input between 110V-240V.
▪ The S unit has an optional internal battery for backup power during power
outages.
▪ Avoid damaging the power cord. Applied pressure, excessive heat, and tugging
may damage the power cord.
▪ The power cord must be routed properly when setup takes place to prevent
workplace hazards and potential damage to the unit.
▪ Do not overload AC outlets or extension cords. Electrical shocks or fires may
occur from overloading.
▪ Do not touch the power source during a thunderstorm.
▪ If your hands are wet, do not touch the plug.
▪ When unplugging the power cord, firmly grip the cord with your thumb and index
finger and disconnect it from the electrical socket. Pulling on the cord may
damage it.
▪ Disconnect the unit if it will not be in use for an extended period of time.
▪ The S unit uses 19V DC output from an adapter. Connect the unit to a power
source with the same numerical value as indicated. Please only use the power
cord provided by the dealer to ensure safety and EMC compliance.
DOC ID: 16000200