Environmental Factors; Ventilation Spacing - Cybernet CyberMed S22 User Manual

: To avoid risk of electric shock, this equipment must only be connected to a
WARNING
supply mains with protective earth.
Disconnect Device
▪ To fully disengage the power to the unit, please ensure the system has been
properly shutdown before disconnecting the power cord from the AC inlet.

Environmental Factors

▪ Operating Temperature:
▪ Operating Humidity (Non-Condensing): 10% to 90%. Non-operating Humidity
(Non-condensing): 10% to 90%.
▪ Pressure: 700 to 1060hPa (0-3000m)
▪ Do not insert objects into the openings.
▪ Do not allow liquids to seep into the internal areas of the AIO PC.
▪ Having liquids seep in or inserting objects into the unit may result in electric
shock and/or short circuiting the internal parts.
▪ If water has seeped in, immediately disconnect the Power- Then contact a
service technician for repairs.
▪ Do not place the AIO PC in the presence of high moisture areas.
▪ Do not install the AIO PC in a wet environment.
▪ Do not place unit near heat generating sources.
▪ Do not place the unit in a location where it will come in contact with excessive
fumes or steam.
▪ Remember to keep the AIO PC away from the presence of excessive dust.

Ventilation Spacing

▪ This unit is sealed and there are no openings on the front. The rear I/O area is
exposed and may allow liquid ingress, however, due to the angle, it is unlikely.
▪ Unless proper ventilation is present, do not place the unit in an enclosed area;
DOC ID: 16000200
0°C to 35°C; Non-operating temperature: -20°C to 60°C.