Product Overview; Controls - Toro Reelmaster 5010-H Operator's Manual

Traction unit
Hide thumbs Also See for Reelmaster 5010-H:
Table of Contents

Advertisement

Figure 39
1. CE warning decal
2.
Remove the backing from the CE warning decal.
3.
Apply the CE warning decal over decal 133-293.
g375338
2. Warning decal 133-293

Product Overview

1. Engine hood
2. Operator's seat
3. Control arm
4. Steering wheel

Controls

Traction Pedal
The traction pedal
(Figure
and reverse operation. Press the top of the pedal to
move the machine forward and the bottom to move
the machine backward. Ground speed depends on
how far you press the pedal. For no load, maximum
ground speed, fully press the pedal while the throttle
is in the F
position.
AST
To stop the machine, reduce foot pressure on the
traction pedal and allow it to return to the center
position.
23
Figure 40
5. Seat adjustments
6. Front cutting units
7. Rear cutting units
41) controls the forward
g260768

Advertisement

Table of Contents
loading

This manual is also suitable for:

03674

Table of Contents