Jacking Point Locations - Toro Reelmaster 5010-H Operator's Manual

Figure 68
1. Flange-head capscrew
2. Upper generator
cooling-air shroud

Jacking Point Locations

Note:
Support the machine with jack stands
whenever you work under the machine; refer to
Specifications (page 30).
Use the following as machine-lift points:
g378913
3. Flange locknut
4. Lower generator
cooling-air shroud
1. Front of the machine
2. Jack brackets (front-axle
tube)
•
Front—the jack brackets of the front-axle tube
(Figure 69).
•
Rear—the rear-axle tube.
46
Figure 69
3. Rear-axle tube
4. Back of the machine
g375763