Removing The Riser - Check Point QUANTUM SMART-1 Manual

Hide thumbs Also See for QUANTUM SMART-1:

Table of Contents

7. Put the Electrostatic Discharge (ESD) grounding strap on your wrist and attach the other end to a

grounding point.

8. Remove the appliance cover:

a. Use a 1/4 inch flat head or a Phillips #2 screwdriver to turn the lock counter clockwise to the

unlocked position (1).

b. Open the release latch until the system cover slides back (2).

c. Lift the cover from the system (3).

Removing the Riser

1. Open the blue expansion card riser retention latch located on the appliance (1).

2. Holding the blue touch points (2), lift the expansion card riser from the appliance.

Note - The illustration shows a riser with only the onboard NIC installed.

Quantum Smart-1 600-M/6000-L/6000-XL Appliances Replacing Line Cards | 10

Procedure for Smart-1 600-M Appliances

Table of Contents

Do you have a question about the QUANTUM SMART-1 and is the answer not in the manual?

Quantum 600-m Quantum 6000-l Quantum 6000-xl