Electrolux EVE602 User Manual page 8

8 electrolux.com.au
IMPORTANT INSTRUCTIONS
Side racks
1. Insert the rear peg into the rear access hole provided,
ensuring peg is fully inserted.
2. Then locate the front peg into the front access hole
and push in firmly.
NOTE: If you have purchased a two cavity appliance you
will have additional side racks for the lower oven/grill. These
are fitted in a similar manner.
Pyro proof side racks
1. Insert the rear peg into the rear access hole provided,
ensuring peg is fully inserted.
2. Then locate the front hole and insert screw.
3. Tighten with Allen key.
Shelves
The shelves are designed so that they have maximum
extension but cannot be accidentally pulled right out.
To fit a shelf to side racks:
NOTE: To Locate the rear edge of the shelves, the detents
on the side wires should be towards the oven back wall.
See image.
1. Rest the rear edge of the shelf on the lower guide rail
(CONTINUED)
of the side rack - see diagram. Ensure the same rail
positions on both sides of the oven are being engaged.
2. With the front edge raised, begin to slide the shelf in
between the guide rails of the side rack.
3. Once the detents have passed the front edge of the
side rack, the shelf can be pushed fully in.
4. When fully inserted the shelf should not interfere with
the closed oven door.
To fit a shelf or tray to telescopic slides:
1. Push the shelf or tray along the top of the slide until it
hits the back post.
2. Drop the front of the shelf or tray onto the slide
ensuring it sits behind the front post of the slide.
3. When fully inserted the shelf/tray should not interfere
with the closed oven door.
The appliance is supplied with two types of shelves
1. Standard shelf
2. Grill shelf – The roasting dish can be suspended
under the grill shelf to catch dripping fat. Rest the tray
on two side rails of the grill shelf and push all the way
in. Once the tray is pushed in fully it should sit inside
the side rails.
Detent
Back post
Back post
Front post
Front post