Electrolux EVE602 User Manual page 66

66 electrolux.com.au
CLEANING THE APPLIANCE
Do not misplace them!
CAUTION
• Do not to use harsh abrasives on the glass
panes as the reflective surface plays a role in
the function of the oven.
• Do not place glass in dishwasher. Hand wash
only with a soft cloth and warm soapy water.
When dry, polish with a soft cloth and ensure
the glass is dry before reassembly.
• Be careful not to hit the corner of the glass on
the benchtop as the glass my break.
Replacing door glass panels
1. Assemble the silicone spacers to the upper corners
of one of the clear glass panels. Position the panel
into the lower position of the door, ensuring the
chamfered corner of the panel is placed in the correct
location as shown in the image below.
2. Insert the remaining smaller clear glass panel into the
middle position, ensuring the chamfered corner of the
panel is placed in the correct location as shown in the
image below.
(CONTINUED)
3. Insert the black bordered glass panel into the upper
position, ensuring the painted surface is facing the
downside as per the image below.
Replacing the top door trim
1. Hold the top door trim at each side and position it to
the inside edge of the glass with trim vent opening
closest to glass.
2. Push the trim down with its top edge over the glass
panel until the clip snap in on each side of the trim.
Silicone
spacers
3. Push the middle of the trim down to ensure it is
straight and firm against the glass panel.
Chamfer to be located in this corner