OMAC AS 1100 Operator's Manual page 38

To prepare the fuel mixture:
– Place about half the amount of petrol in a homologated tank.
– Add all the oil, according to the chart.
– Add the rest of the petrol.
– Close the top and shake well.
IMPORTANT The fuel mixture tends to age. Do not prepare excessive amounts of the fuel
mixture to avoid the formation of deposits.
IMPORTANT Keep the petrol and fuel mixture containers separate and easily identifiable to
avoid the mistake of using one in place of the other.
IMPORTANT Periodically clean the petrol and fuel mixture containers to remove any eventual
deposits.
2.3 REFUELLING
D ANGER! Never smoke whilst refuelling and avoid inhaling the petrol fumes.
W ARNING! Carefully open the tank top as pressure could have formed inside.
Before refuelling:
– Place the machine on a flat stable surface, with the fuel tank cap facing upwards.
– Clean the fuel tank cap and the surrounding area to avoid any dirt from entering the tank
during refilling.
– Carefully open the fuel tank cap to allow the pressure inside to decrease gradually.
To fuel:
– Shake the tank with the fuel mixture well.
– Using a funnel, pour an amount of fuel mixture suited to the work to be performed in the
supplied graduated bottle.
– Refuel without filling the tank to the rim (Fig. 3).
NOTE The machine tank is best filled with about half graduated bottle capacity.
W ARNING! Always close the fuel tank cap firmly.
W ARNING! Immediately clean all traces of fuel which may have dripped on the machine or
the ground and do not start the en-gine until the petrol fumes have dissipated.
38