OMAC AS 1100 Operator's Manual page 35

sawdust, branches, leaves, or excessive grease; never leave containers with the debris inside
the storage area.
9) If the fuel tank has to be emptied, this should be done outdoors once the engine has cooled
down.
10) Wear work gloves when performing all main-tenance.
11) Before putting the machine away, check you have removed wrenches or tools used for
main-tenance.
12) Store the machine out of the reach of children!
13) Often inspect the bag to avoid wear and a decrease in quality.
E) TRANSPORTATION AND HANDLING
1) Whenever the machine is to be handled or transported you must:
• Turn off the engine and disconnect the spark plug cap;
• Only hold the machine using the handgrips and position the tubes so that they do not
obstruct.
2) When using a vehicle to transport the ma-chine, remove the tubes and position it so that it
can cause no danger to persons and fasten it firmly in place to avoid it from tipping over, which
may cause damage or fuel spillage.
F) ENVIRONMENTAL PROTECTION
Environmental protection should be a priority of considerable importance when using the ma-
chine, for the benefit of both social coexistence and the environment in which we live. Try not
to cause any disturbance to the surrounding area.
• Scrupulously comply with local regulations and provisions for the disposal of oils, petrol,
damaged parts or any elements which have a strong impact on the environment; this waste
must not be disposed of as normal waste, it must be separated and taken to specified waste
disposal centres where the material will be recycled.
• Scrupulously comply with local regulations and provisions for the disposal of waste ma-
terials.
• At the time of decommissioning, do not pollute the environment.
35