Advertisement
Available languages
Available languages
CONTROLS AND FUNCTIONAL PARTS
21. Upper handgrip
22. Lower handgrip
23. Engine stop switch
24. Throttle control
25. Throttle setting device
26. Starter
27. Choke
28. Primer
31. Fuel tank cap
32. Spark plug
33. Air filter cover
34. Intake grille
Write the identification data of the machine in the specific space on the label on the back of
the cover page.
The example of the declaration of conformity can be found on the last pages of the manual.
DESCRIPTION OF EXPLANATORY SYMBOLS (where applicable)
41. Fuel mixture tank
42. Engine stop switch positions
a = stop
b = running
43. Choke
a = RUN = normal gear and warm engine
start
b = CHOKE = cold engine start
44. Throttle setting device
a = minimum
b = maximum
SAFETY REQUIREMENTS
Your machine must be used carefully. Symbols have therefore been placed on various parts of
the machine to remind you of the main precautions to be taken.
Their meaning is explained below. You are also asked to carefully read the safety regulations in
the specific chapter of this manual.
Replace damaged or illegible labels.
51. Warning! Danger. The failure to use this machine correctly can be hazardous for oneself and
others. Read the instruction manual before using the machine.
52. Keep all persons away from the work area whilst using.
53. If you are using the machine every day in normal conditions, you can be exposed to a noise
29
Advertisement
