Back Panel - Hand Held Products Dolphin 7200 User Manual

Back Panel

Auxiliary Battery Well
Configuration Switches Use these switches to select the network and communications modes for your Dolphin. See Chapter
Service Aux Batt Switch Press and hold this button for four seconds to service the battery in the auxiliary battery well. For
Power Supply Connector Use this connector to attach a power supply to the HomeBase. The power supply provides 12V DC
Dolphin® 7200 User's Guide
Charging Aux Batt LED Description
Blinking orange LED
Solid green LED
Auxiliary Battery Well (without battery inserted)
Configuration
Switches
Insert a battery into the well to charge a second battery and you will always have a spare. The
auxiliary battery well can also service your battery pack.
8 for more on the configuration switch settings. The configuration switches are checked at power up.
Changes in the switch settings will not be recognized until power is turned off and then back on
maximum battery life, the battery should be serviced, or calibrated once a month. The Charging AUX
BATT LED is red while the battery is discharging and changes to blinking red when the charging cycle
begins. The battery is ready to use when the light turns green.
input for communications and battery charging.
Battery charging at the maximum rate
Trickle charging; battery pack is ready for use
Service Aux Power Supply
Battery Switch Connector
8 - 3