Bar Code Symbologies Supported; Using Dolphin For The First Time - Hand Held Products Dolphin 7200 User Manual

Bar Code Symbologies Supported

1D Linear Codes:
2D Codes:
Composite Codes:
OCR Codes:
Postal Codes:

Using Dolphin for the First Time

This section will show you how to:
1. Be sure that you've received all items included with your Dolphin order
2. Charge the battery
3. Turn the Dolphin on and off
4. Set the date and time
Note: Be sure to keep the original carton and packaging in the event that the Dolphin terminal or Dolphin HomeBase should
need to be returned for service.
Step 1. Checking Your Package
If you ordered a Dolphin 7200 Batch or 2D terminal, inspect the package to see that the following standard items and accessories
(if ordered) are included:
• Dolphin 7200 terminal
• Battery (1500 mAh, Nickel Metal Hydride (NiMH)
• Dolphin 7200 HomeBase
• AC-DC Power Adapter for Dolphin HomeBase
If you ordered a Dolphin 7200 RS-232 terminal, inspect the package to see that the following standard items and accessories (if
ordered) are included:
• Dolphin 7200 RS-232 terminal
• Battery - 1500 mAh, Nickel Metal Hydride (NiMH)
• Dolphin 7200 RS-232 Communication/Charging Cable
• AC-DC Universal Power Adapter
Step 2. Charging the Battery
!
Use only 3.6V battery packs provided by Hand Held Products. The use of any other battery pack in the Dolphin terminal
will void your warranty and may result in damage to the Dolphin terminal or battery.
!
Although the Dolphin 7200 terminal is received with the battery inserted, it is NOT ready for charging and/or deep-
cycling. Remove the plastic insulator located between the terminal and battery connectors. Failure to remove the
insulator may result in damages to the terminal.
The terminal's NiMH battery is not conditioned at the factory and is shipped discharged of all power and inserted in the Dolphin
terminal. For maximum battery life, Hand Held Products recommends that you deep-cycle the battery twice before initial use.
To deep-cycle, insert the battery into the HomeBase auxiliary battery well. Then, push and hold the Service Aux Batt button for
at least four seconds. For more information, see
utility to deep-cycle the battery. This utility is available for download from the Partners Area of www.handheld.com.
Note: For maximum battery life, Hand Held Products recommends that you deep-cycle (service) the battery twice before initial
use and then, once a month thereafter.
2 - 4
Code 3 of 9, Interleaved 2 of 5, Code 11, MSI, UPC A, UPC EO, UPC EI, EAN/EAN13, Codabar,
Code 128, Code 93, UPC
PDF417, microPDF, Maxicode, Datamatrix, Aztec, QR Code, Code 49
RSS-14, CODABLOCK, AZTEC MESA
OCR A and OCR B
Postnet and most international 4 state codes, PLANET CODE, BPO 4 STATE, CANADIAN 4 STATE,
DUTCH POSTAL, AUSTRALIAN 4 STATE, JAPANESE POSTAL
Deep-Cycling the Battery on page 8-6. You may also use the CycleBat software
Dolphin® 7200 User's Guide