ICP DAS USA 7188XA Series User Manual page 59

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
The X100 is an 8-channel D/I board designed for the 7188X(D)/7521(D).
It removes all 5 resistors, R19 ~ R23, and reconfigures all these pins as D/I
pins. It installs another 5-pin female reconfiguration-jumper into TP1 of the
7188XC(D)/7521(D). Therefore, user can select the original 3_DO_2_DI
functions or new 5_DI functions by setting the jumper in different
positions. Refer to "I/O Expansion Bus in the 7188X/7188E User' s Manual"
for more information.
The 7188XB(D) has 14 user-defined pins. But the 7188X(B) & 7188X(A)
don't support the reconfiguration-resistor. So the user-defined pins of the
7188X/7521 family are given as follows:
User defined pins Reconfiguration pins Customized I/O pins
7188XA(D) 0
7188XB(D) 14
7188XC(D) 3
3
7521(D)
7522/23(D) 0
7188XA/B/C & 7521/2/2A/3/4/7 Series Hardware User' s Manual, Ver. 3.0 Sep/2002, 7Mh-001-20 -----
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
0
0
5
5
0
0+0=0
14+0=14
3+5=8
3+5=8
0+0=0
59