Hardware Installation - Ubiquiti EdgeRouter PRO ERPro-8 Quick Start Manual

Back Panel
Mounting Holes
Note:
of the EdgeRouter PRO.

Hardware Installation

WARNING:
MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF
CLEARANCE NEXT TO THE VENTILATION HOLES FOR
ADEQUATE AIRFLOW.
1. Attach the EdgeRouter PRO to the rack using the four
Mounting Screws. (If the rack has square slots, then use the
Cage Nuts with the Mounting Screws.)
www.4Gon.co.uk info@4gon.co.uk Tel: (0)0330 088 0295 Fax: +44 (0)1245 808299
Ventilation Holes
There are additional ventilation holes on the sides
FAILURE TO PROVIDE PROPER VENTILATION
Fans
Mounting Holes
Power