Table of Contents
Advertisement
Installing the Nokia IP561 Appliance
Figure 7 Rack-Mounting Screw Locations
Two rack-mounting positions allow you to mount the appliance either flush with the rack, or two
inches forward of the equipment rack. If the space behind the rack is insufficient, the rack-
mounting brackets can be attached further back on the side of the appliance.
Caution
During installation, do not block any ventilation openings. Doing so might result in
damage to the appliance when it is turned on.
To rack-mount the appliance
Caution
The appliance is heavy. Use care when you remove it from the packaging.
1. Remove the appliance from the packaging.
2. Optionally, remove the fan unit from the back of the appliance to lighten it.
a. Locate the fan unit and the two retaining screws that secure it on the back of the IP561.
b. Loosen the retaining screws by turning them counterclockwise.
30
SLOT 1
SLOT 2
Rack-mounting screw locations
Nokia IP561 Security Platform Installation Guide
SLOT 3
SLOT 4
1
2
3
4
00354gen
00353
Fan unit
Advertisement
Table of Contents
