Filling The Water Tank; Selecting And Starting An Application - V-ZUG CombiSteamer V4000 Operating Instructions Manual

4 Operation
Expanding the right function bar
The right function bar can be expanded at any time.
▸ Drag the bar 3 to the left.
– The function bar expands.
– More functions appear in the display.
Using the CircleSlider
▸ Touch the desired application or function.
– The colour of the selected range turns amber and can
now be changed.
– The temperature range is already activated and can be
changed directly.
▸ Place your finger on the CircleSlider 4 and move it in a
circle.
– The value range changes.
▸ Release the CircleSlider 4.
▸ Press «Start» to start an application or a function.
4.2

Filling the water tank

Do not use filtered (demineralized) or distilled water. Pour away any water that is
left in the water tank and fill with fresh drinking water.
▸ Touch the «Water compartment flap» function button.
– The flap of the water tank compartment opens.
▸ Take the water tank out of the appliance.
▸ Fill the water tank with water up to the «max.» mark.
– Only fill with fresh, cold drinking water.
– The «max.» mark is in the round opening in the lid. Let into it is a tab embossed
with «max.».
▸ Slot the filled water tank into position in the water tank compartment.
▸ Close the water compartment flap manually.
Refilling the water tank
The contents of the water tank normally suffice for one cooking session.
If, however, the water tank needs to be refilled:
▸ Do not pour more than 1 l of water into the water tank as otherwise water could spill
over at the end of operation.
4.3

Selecting and starting an application

▸ Long touch the display.
– The start screen appears.
Selecting an application group
Either:
▸ In the app view, touch the desired application group.
– The submenu with the associated applications appears in the display.
Or:
▸ In the list view, select the desired application group using the CircleSlider or by
swiping up or down.
16
4
Start