Filling The Water Tank; Selecting And Starting An Application - V-ZUG CombiSteamer V6000 Operating Instructions Manual

4 Operation
4.2

Filling the water tank

Do not use filtered (demineralized) or distilled water.
▸ Touch the «Water tank» function button.
– The flap of the water tank compartment opens.
▸ Take the water tank out of the appliance.
▸ Fill the water tank with water up to the «max.» mark.
– Only fill with fresh, cold drinking water.
– The «max.» mark is in the round opening in the lid. Let into it is a tab embossed
with «max.».
▸ Slot the filled water tank into position in the water tank compartment.
Refilling the water tank
The contents of the water tank normally suffice for one cooking session.
If, however, the water tank needs to be refilled:
▸ Do not pour more than 1 l of water into the water tank as otherwise water could spill
over at the end of operation.
4.3

Selecting and starting an application

▸ Long touch the display.
– The start screen appears.
Selecting an application group
Either:
▸ In the app view, touch the desired application group.
– The submenu with the associated applications appears in the display.
Or:
▸ In the list view, select the desired application group using the CircleSlider or by
swiping up or down.
▸ Press «OK» or touch the application.
– The submenu with the associated applications appears in the display.
Hot air, dry
Hot air with bottom heat
Hot air, humid
Hot air Eco
Selecting an application
▸ Select the desired application using the CircleSlider.
– Choose an item in the list by swiping, navigating and touching it.
▸ Touch the desired application and press «OK».
– The ready to start screen or another submenu with more applications appears in
the display.
16
Hot air Eco
Consumes up to 15% less
power with almost the same
OK
cooking time.
This operating mode is suitable
for potato gratin, baked dishes
and flans.