V-ZUG CombiSteamer V4000 Operating Instructions Manual page 37

Hide thumbs Also See for CombiSteamer V4000:
Table of Contents

Advertisement

Cut of meat
Neck of pork
Shoulder of pork
Leg of lamb
Soft roasting seared
▸ Season or marinate the meat.
Remove any marinade made with herbs, mustard, etc. from the meat before sear-
ing. These constituents easily burn.
▸ Salt the meat immediately before searing.
▸ Briefly sear the meat on all sides for no longer than 5 minutes.
▸ Then place the meat on the wire shelf.
The meat can also be browned after cooking. This has little effect on the degree of
doneness of large cuts of meat. For small cuts of meat, the target temperature
should be reduced by 2–3 °C.
▸ Insert the food probe into the meat so that the tip is in the centre of the thickest part.
For a correct food probe temperature reading, the food probe must as far as pos-
sible be fully inserted into the centre of the food. The temperature inside the meat
is crucial for optimal results at the end of cooking.
▸ Put the wire shelf with the meat at level 2 and a baking tray, which has been lined with
aluminium foil, at level 1.
▸ Insert the food probe plug into the socket.
▸ Start
«Soft roasting seared».
Selecting and starting soft roasting
Once the programme has started it is no longer possible to change the target tem-
perature.
▸ Long touch the display.
– The start screen appears.
▸ Select the
«Soft roasting» application group and confirm with «OK», if required (see
page 16).
▸ Select the desired type of meat.
▸ Select the desired cut of meat.
▸ Select the desired soft roasting method and confirm with «OK».
If the desired type of meat or cut is not available for selection, select «Freely se-
lect meat type».
▸ Select the degree of doneness (not possible for «Freely select meat type»).
– The settings for the application appear in the display.
▸ Adjust the recommended value, if necessary, and set a delayed start if desired (see
page 19).
▸ Press «Start» to start soft roasting.
Degree of
Recommended target
doneness
temperature °C
well done
well done
medium
well done
5 Applications
76
76
65
74
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Combisteamer v4000 45Cs4t-23031

Table of Contents