Filling The Water Tank - V-ZUG CombiSteamer V6000 Operating Instructions Manual

▸ Release app 2.
– Quick information disappears. In the Favourites
does not disappear in order that Rename or Remove can be selected.
Moving an app
The apps can be moved and reordered in the app view.
▸ Press and hold the desired app 2 and move it to change the app order.
– The apps are spread over three pages; only one app can be moved at a time.
▸ Release app 2.
– The new app order is saved.
Expanding the right function bar
The right function bar can be expanded at any time.
▸ Drag the bar 3 to the left.
– The function bar expands.
– More functions appear in the display.
Using the CircleSlider
▸ Place your finger on the CircleSlider 4 and move it in a
circle.
▸ Release the CircleSlider 4.
– An application or a function was selected.
– The colour of the value range changes to amber.
– A value or a setting was reduced, increased or adjus-
ted.
▸ Press «Start» to start an application or a function.
4.2

Filling the water tank

Do not use filtered (demineralized) or distilled water.
▸ Touch the «Water tank» function button.
– The flap of the water tank compartment opens.
▸ Take the water tank out of the appliance.
▸ Fill the water tank with water up to the «max.» mark.
– Only fill with fresh, cold drinking water.
– The «max.» mark is in the round opening in the lid. Let into it is a tab embossed
with «max.».
▸ Slot the filled water tank into position in the water tank compartment.
Refilling the water tank
The contents of the water tank normally suffice for one cooking session.
If, however, the water tank needs to be refilled:
▸ Do not pour more than 1 l of water into the water tank as otherwise water could spill
over at the end of operation.
application, Quick information
4
4 Operation
Start
15