Page 1
Instruction Manual RIDE ON BUMPER CAR 360 ROTATION (12V) Item number: 060-ROT-06V2 Note: Product appearance and colors may vary from the photo. This vehicle is packed with the battery disconnected. Connect the battery before use. This manual contains important safety, performance and maintenance information.
Page 2
When using electrical product, basic safety precaution should always be followed including the following Read all Instructions before operating this product WARNING: To Protect against electrical shock, do not immerse cord, charger, transformer, battery, or the product in water or other liquid. Only use charging devices, transformer, and battery provided or recommended by the manufacturer.
Page 3
WARNING: Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, WARNING: Stop operating this product whenever it stuck under any circumstances. WARNING: Friction Hazards! Do not operate this product on carpets or rugs, it may cause burn or operated incorrectly, wait for 10 - 15 seconds to reactivate this product automatically.
Page 4
1. Vehicle Body 6. Light Switch 2. Seat Cover 7. Speed Switch 3. Seat Belt 8. Charging Port 4. Control Stick 9. Remote Control 10. Lighting 5. Power Switch...
Before activating this vehicle Unscrew to detach the seat cover. Connect the battery terminals. (Red terminal connect to Red connector, Black terminal connect to Black connector). Attach the seat cover and tighten the screws. - low speed = hight speed Charging the battery WARNING! The battery should only be charged by adult.
Page 6
Operating this vehicle. To turn on the vehicle, press the power switch “I”. To turn o the vehicle, press the power switch “O”. To select low speed, press “--” speed switch. To select high speed, press “=” speed switch. To light on the vehicle, press light symbol switch. To move the vehicle forward, push both control sticks forward at the same time.
Page 7
Press the "P " switch again to activate the vehicle. Bluetooth connection To connect your mobile device to the vehicle, turn on the Bluetooth and select "Kidzone Bumper Car". Voice message "Connected Note” followed by “Your device is connected successfully” after pairing.
Page 10
Model: TX4 FCC ID: 2AJ2H-WYTX4 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the 060-ROT-06V2 and is the answer not in the manual?
Questions and answers