Changing Location; Disposal And Scrapping; Technical Data - Bosch KTS 250 Original Instructions Manual

7. Decommissioning
7.1 ---

Changing location

 If the KTS 250 is passed on, all the documentation in‐
cluded in the scope of delivery must be handed over
together with the unit.
 The KTS 250 is only ever to be transported in the orig‐
inal or equivalent packaging.
 Heed the notes on initial commissioning.
 Before handing over, reset KTS 250 to factory set‐
 12 "System recovery".
tings. See
---Separator---
7.2

Disposal and scrapping

 Dismantle the KTS 250 and sort out and dispose of
the different materials in accordance with the applica‐
ble regulations.
 Proper disposal prevents environmental pollution and
health hazards.
The KTS 250 is subject to the European directive
2012/19/EU (WEEE).
---Separator---
8.

Technical data

---
8.1 KTS 250 specifications
Property
Display
Operating system
RAM (OS)
Hard drive (OS)
Processor (OS)
RAM (diagnostic device)
Hard drive (diagnostic device)
Processor (diagnostic device)
WLAN
Storage battery (Li-ion)
Dimensions (W x H x D)
Weight with storage battery, without
power supply unit
Degree of protection
Maximum operating altitude (with power
supply unit)
Maximum operating altitude (without
power supply unit)
Voltage from power supply unit
Current from power supply unit
Voltage supply from the vehicle via OBD
Voltage supply from the vehicle via OBD
Operating Temperature
Robert Bosch GmbH
Property
Storage Temperature
Relative operating humidity
---Separator---
Specification
7" LCD
(1024 x 600 pixels)
AOSP 6.0.1
2 GB
16 GB SSD
i.MX6Q 1.2 GHz
(Quad Core)
1 GB
32-GB SD memory
card
i.MX6D 800 MHz
(Dual Core)
WLAN 802.11 b/g/n
7.2 V / 2600 mAh
(typ.)
295 x 180 x 40 mm
1.2 kg
IP 20
2000 m
4000 m
15 V
1.66 A
10 V – 28 V
1.6 A
0 °C – 40 °C
32 °F – 104 °F
KTS 250 | 13 | en
Specification
-20 °C – 50 °C
-13 °F – 122 °F
20 % – 80 %, non-
condensing
1 689 989 370 | 2022-01-08