Section 2-Safety Inspection; Safety Inspection Checklists - Probasics PB6074 Owner's Operation And Maintenance Manual

NOTE: Every six months or as necessary take your recliner to a qualified
dealer for a thorough inspection and servicing. Regular cleaning
service and inspection will reveal loose or worn parts and enhance the
smooth operation of your recliner. To operate properly and safely, your
recliner must be cared for appropriately as any other vehicle. Routine
maintenance will extend the life and efficiency of your recliner.

SAFETY INSPECTION CHECKLISTS

WARNING
As with any transport device, casters should be checked periodically for
cracks and wear and should be replaced as necessary.
Initial adjustments should be made to suit your personal body structure
needs and preference. Thereafter follow these maintenance procedures:
INSPECT/ADJUST BEFORE FIRST USE
❑ Ensure that the recliner rolls straight (no excessive drag or pull to
one side).
❑ Ensure seat, back and/or armrest upholstery have no rips and do not
sag. Replace if necessary.
❑ Ensure that the seat upholstery is fastened to the seat frame.
❑ Clean seat upholstery and armrests.
❑ Inspect caster assembly to ensure it has proper tension when caster
is spun. Caster should come to a gradual stop.
❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds
to a stop.
❑ Ensure that the caster assembly is free from debris.
❑ Inspect for any loose hardware on the recliner.
❑ Check that all labels are present and legible (as illustrated on p.4).
Replace if necessary.
8
SECTION 2—SAFETY INSPECTION
INSPECT/ADJUST WEEKLY
❑ Ensure that the seat upholstery is fastened to the seat frame.
❑ Ensure seat, back and/or armrest upholstery have no rips and do not
sag. Replace if necessary.
❑ Ensure that the caster assembly is free of debris.
INSPECT/ADJUST MONTHLY
❑ Ensure that the recliner rolls straight (no excessive drag or pull to
one side).
❑ Ensure that the seat upholstery is fastened to the seat frame.
❑ Inspect caster assembly to ensure it has proper tension when caster
is spun. Caster should come to a gradual stop.
❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds
to a stop.
❑ Inspect for any loose hardware on the recliner.
❑ Ensure recliner rolls straight (no excessive drag or pull to one side).
❑ Ensure seat, back and/or armrest upholstery have no rips and do not
sag. Replace if necessary.
❑ Clean upholstery and armrests.
❑ Check that all labels are present and legible. Replace if necessary.
❑ Inspect all pivot points and fasteners for wear. Replace if necessary.