Locking/Unlocking The Rear Wheels; Installing/Storing The Tray; Adjusting The Tray Position - Probasics PB6074 Owner's Operation And Maintenance Manual

LOCKING/UNLOCKING THE REAR WHEELS

NOTE: For this procedure, refer to FIGURE 4.3.
1. Push down on the wheel lock mechanism to engage the wheel
locks.
2. Release the wheel locks by pushing the other side of the lock
mechanism downward.
LOCKING
Wheel Lock
Mechanism
FIGURE 4.3 Locking/Unlocking the Rear Wheels
SECTION 4—OPERATION (CONT)
UNLOCKING
Wheel Lock
Mechanism

INSTALLING/STORING THE TRAY

NOTE: For this procedure, refer to FIGURE 4.4.
NOTE: Reverse this procedure to remove the tray.
WARNING: The tray has a weight limitation of 40 lbs. (18.2 kg).
1. Pull down on the plunger release knobs on both arms and twist
them ¼-turn to lock them in the open position.
2. Pull the tray up and clear from the hangers located on the side of
the recliner.
3. Align the alignment rods with the mounting brackets under the
armrests of the recliner.
4. Insert the alignment rods into the mounting brackets.
5. Slide the tray to the desired position until an audible click is heard.
Mounting Bracket
Tray
(Hidden from View)
Plunger Alignment
Release Rods Plunger
Knob Release Knob
FIGURE 4.4 Installing/Storing the Tray
DETAIL "A" - DETAIL "B" -
FRONT VIEW SIDE VIEW
Tray
Armrest
Mounting
Brackets
Armrest
Hangers
11