Installing Side Panel; Replacing The Armrest Cushion; Removing Armrest Cushion; Installing Armrest Cushion - Probasics PB6074 Owner's Operation And Maintenance Manual

INSTALLING SIDE PANEL

1. Slip the top of the right-side panel into the mounting tab.
2. Push the side panel upward until the side panel fit into the side
frame.
3. Pop the side panel into position when the push buttons are visible,
through the push pin holes, near the bottom of the side frame.
FIGURE 5.7 Removing/Installing the Side Panel

REPLACING THE ARMREST CUSHION

NOTE: For this procedure, refer to FIGURE 5.8.

REMOVING ARMREST CUSHION

1. Remove four screws securing the armrest cushion to the
recliner frame.
2. Remove the armrest cushion from the recliner frame.
16
SECTION 5— MAINTENANCE (CONT)
Side
Panel
Push Buttons

INSTALLING ARMREST CUSHION

1. Align the armrest cushion with the recliner frame.
2. Secure the armrest cushion to the recliner frame with the
four screws.
FIGURE 5.8 Replacing the Armrest Cushion
Screws