Section 4-Operation; Reclining The Chair; Positioning The Articulating Headrest - Probasics PB6074 Owner's Operation And Maintenance Manual

Three-position recliner
Table of Contents

Advertisement

WARNING
After ANY adjustments, repair or service and BEFORE use, ensure
that all attaching hardware is tightened securely - otherwise injury or
damage may result.
CAUTION
Ensure that there is adequate room to operate the ProBasics Mobile
Recliner. There must be at least three feet clearance between the top of
the recliner back and the surrounding objects, otherwise damage to the
recliner and or surrounding property may occur.

RECLINING THE CHAIR

USER RECLINE
NOTE: For this procedure, refer to FIGURE 4.1.
NOTE: The chair cannot recline if the recline lock bar is engaged. An
assistant must first swing recline lock bar up to the chair back and lock
into position.
1. While seated in the recliner, grip the armrests and simultaneously
lean body weight back and push forward with your arms until a
recline position reached.
NOTE: The footrest will lift automatically when the chair back reclines.
NOTE: The occupant should not be required to exert excessive force to
change recline positions. If the recliner exhibits difficulty in reclining, an
attendant should be called for assistance.
10
SECTION 4—OPERATION
ASSISTED RECLINE
NOTE: For this procedure, refer to FIGURE 4.2.
1. Swing recline lock bar up to chair back and lock into position.
2. Grasp the armrest with one hand and the push bar with the other
hand.
3. Push the back of the chair down slowly until a desired position is
reached.
NOTE: The caregiver can set recline lock bar at one of the three locking
positions.
FIGURE 4.1 RECLINING THE CHAIR - USER RECLINE
Position
Lock Lever
Storage
Position
FIGURE 4.2 RECLINING THE CHAIR - ASSISTED RECLINE
Back
Assembly

Advertisement

Table of Contents
loading

Table of Contents