Accessories - Graco Core E1 Operation, Repair, And Parts

TPC (26D000)
Ref. Part
Description
301 19B841
CONTROLLER, CORE E1 transfer
pump
302 121004
CABLE, can, female/female 8.0 m
303 121055 CORD SET
304 26D296 KIT, install, IEC field wireable C13
plug
305 25U011 LABEL, safety
▲
306 195793 LABEL, warning
▲
307 186620 LABEL, symbol, ground
▲
▲ Replacement safety labels, tags, and cards are
available at no cost.
303
304
3A8503C
307
301
302
305
306

Accessories

To ensure maximum pump performance, make sure all
Qty.
accessories are properly sized to meet your system
1
requirements.
1
Fluid Line
1
Fluid drain valve (AE): Required in your system to
1
relieve fluid pressure in the hose and gun. Install the
drain valve so that it points down and the handle points
1
up when the valve is opened.
1
1
Fluid Drain Valve (not included)
Maximum Working Pressure: 500 psi (3.5 MPa, 35 bar)
Part Description
208630 VALVE, ball; 1/2 npt(m) x 3/8 npt(f) for
non-corrosive fluids; carbon steel and
PTFE
237534 VALVE, ball; 3/8 npt(m) x 3/8 npt(f) for
corrosive fluids; SST and PTFE
Parts
Qty.
1
1
29