Check Point 21000 Series Installing And Removing Memory page 2

Important - To protect the appliance and the memory modules from
electrostatic discharge damage, make sure that you are properly
grounded before you touch any of the electronic components. Read
the Health and Safety Information in the
Appliances Getting Started Guide
appliance.
We recommend that you use the grounding wrist strap that is
included in the upgrade kit. The grounding plug on the rear of the
appliance provides a chassis grounding point.
Upgrade Kit Contents
Installation guide - Check Point 21000 Installing and Removing Memory

Memory DIMMs

Screw driver

Upgrade kit sticker

ESD grounding strap (anti-static)

To prepare the appliance:
1. Press the power switch, and release it immediately.
The appliance shuts down.
2. Remove the power cords from the appliance.
3. Put on the ESD strap and attach the other end to a grounding point.
4. Loosen the two retaining screws for the bottom tray.
Only use the screwdriver that is included in the upgrade kit on the
retaining screws.
Check Point 21000
before you start to prepare the
2