Check Point 21000 Series Installing And Removing Memory page 11

6. Insert the bottom tray in the appliance.
a) Move the bottom tray into the appliance until it clicks into position.
b) Tighten the two retaining screws for the bottom tray.
7. Make sure the memory DIMMs are installed correctly.
a) Connect the power cords to the appliance.
b) Turn on the appliance using the power switch at the rear of the
appliance.
c) Make sure that the LCD screen shows the appliance model.
d) Confirm the appliance RAM configuration, from the CLI run
cat/proc/meminfo.
11