Work Sharp CPE5-NH User Manual page 5

• To protect against electrical hazards, do not immerse in water or other liquid. Do not expose
to rain or wet conditions.
• Avoid contact with moving parts.
• Only use replacement parts or attachments recommended or sold by the manufacturer. Use
of unauthorized parts may cause fire, electric shock or injury.
• Only insert clean knife blades into the appliance. Do not attempt to sharpen axes or other
tools, or any blade that does not fit properly into the sharpening slots.
• Do not use oils, water or any other lubricant with appliance.
• Do not operate appliance if the switch does not turn it on and off.
• Do not use outdoors.
The appliance label may include the following symbols:
V............................................................Volts
A .....................................................amperes
Hz ......................................................... Hertz
W...........................................................watts
SERVICE
Please contact Work Sharp Customer Support:
Work Sharp
210 E. Hersey St.
Ashland, OR 97520 USA
SAVE THESE INSTRUCTIONS
— Original Instructions —
min ..................................................minutes
....................... alternating current
...............................direct current
n o
.......................................no load speed
Web: www.worksharptools.com
Phone: 1.800.418.1439
Fax: 1.541.552.1377
E-mail: info@worksharptools.com
.................Class III Construction
........................ safety alert symbol
.............................earthing terminal
rpm ...................................revolutions or
reciprocations per minute
5 | S A F E T Y