Arm Motion Sensors; Disarm; Subdisarm; Lights - GE Simon Security System User Manual

Note
Depending upon how your
dealer programmed your
panel, you may be required
to enter your access code to
arm the system.
12
Press twice to eliminate the pre-programmed entry delay.

ARM Motion Sensors

Press Arm Motion Sensors button once to turn protection on for all Motion Sensors.
Use when no one is home. This is usually used in combination with ARM Doors &
Windows. Press twice to activate the Latchkey feature.

Disarm

Press Disarm button once and enter your access code using the NUMERIC buttons to
turn security protection off. To subdisarm the system, enter the master access code.

Subdisarm

Enter your master access code using the NUMERIC buttons while the system is dis-
armed. Panel will announce, system disarmed. The Disarm button on the panel will
begin to blink.

Lights

¾ Turn on individual lights that are controlled by Lamp Modules:
1. Press Lights On button once.
2. Press the number of the lamp module you want to turn on.
Panel will announce, light <number> on.
¾ Turn off individual lights that are controlled by Lamp Modules:
1. Press Lights Off button once.
2. Press the number of the lamp module you want to turn off.
Panel will announce, light <number> off.
¾ Turn on all lights that are controlled by Lamp Modules:
1. Press Lights On button twice.
Panel will announce, lights on.
¾ Turn off all lights that are controlled by Lamp Modules:
1. Press Lights Off button twice.
Panel will announce, lights off.

Emergency

Press both EMERGENCY buttons for 3 seconds to cause the system to call a central
monitoring station to report a non-medical emergency.

Keychain Touchpad

For any keypress on the Keychain Touchpad, hold the button until the indicator light
blinks.
If your installer programmed the Keychain Touchpad with no entry delay, and you
armed the system with the Keychain Touchpad, you must disarm your system before
entering the home to avoid causing an alarm.
If your installer programmed your system for Remote Touchpad Arming, you must
enter your home to start the entry delay before you can use your Keychain Touchpad to
disarm the system.
!
To avoid causing false alarms, check with your installer on how your touchpad
options are programmed
!
Warning
Security system devices cannot compensate you for the loss of life
Simon Security System