Furuno NavNet TZtouchXL TZT10X Operator's Manual

Multi function display

Hide thumbs Also See for NavNet TZtouchXL TZT10X:

Installation manual (74 pages)

Faq (19 pages)

Installation manual (71 pages)

Table Of Contents

Table of Contents

Quick Links

Download this manual

This guide provides the basic operating procedures for this equipment. For detailed information, see the Operator's

Manual, available on our homepage. Connection of sensors required.

iPhone, iPod and iPad are trademarks of Apple Inc. Android is a trademark of Google Inc. All brand and product

names are trademarks, registered trademarks or service marks of their respective holders.

The layout of the screen illustrations in this guide may differ depending on your system configuration and settings.

Operational Overview

Icon (home/displays), power switch operations

TZT16X/22X/24X

Tap

Power off

Device: Powers off

this unit.

Network: Powers off all

NavNet TZtouch series

units in network.

Brilliance, Hue

Hue:

Brilliance:

Day

How to select a display

- Tap a display icon on the Home page (see illustration above).

- Tap a display icon on the Quick page.

Swipe downward from

top of display

MULTI FUNCTION DISPLAY

TZT10X/13X/16X/22X/24X/BBX

Model

TZT10X/13X

(right side of pane

TZTBBX

( switch

bottom left)

Power switch

- Turns on power.

- Shows [Quick Access] window.

Tap

Quick page

www.furuno.com

Operator's Guide

[FURUNO] icon

Displays the

Display icons

home page.

(max. 16 on

Home page)

"eGuide" provides

an abbreviated

operator's guide.

How to edit a display icon

Long-tap a display icon to resize, delete or change its contents,

then tap to confirm. You can also rearrange the icons by

long-tapping and dragging.

Tap

Edit

Display icon, long tapped

Home page

Delete

Size

(large or small)

Table of Contents

Need help?

Do you have a question about the NavNet TZtouchXL TZT10X and is the answer not in the manual?

Questions and answers

Summary of Contents for Furuno NavNet TZtouchXL TZT10X

Page 1 The layout of the screen illustrations in this guide may differ depending on your system configuration and settings. Operational Overview Icon (home/displays), power switch operations TZT16X/22X/24X TZT16X/22X/24X [FURUNO] icon TZT10X/13X TZT10X/13X Displays the Display icons (right side of pane (right side of pane home page.
Page 2: Touch Screen Operations
Swipe leftward from the right edge. (To switch between menus, Icon color and function state swipe or tap applicable tab.) Yellow: ON, White: OFF Settings menu Tap the [FURUNO] icon. Tap [Settings]. Drag to find required menu, then tap item. Tap the required menu item.
Page 3: Chart Plotter
Chart Plotter [FURUNO] icon Navigation bar Event icon Center Vessel button Speed Alarm Undo, Range Status bar Status bar Redo buttons Data Data buttons COG vector COG vector Heading line Heading line window window (dashed red line) (dashed red line)
Page 4 Points/Boundaries Points can be entered on the chart plotter display (radar, fish finder and weather displays also) to mark important locations such as a good fishing spot. Point attributes (position, symbol type, color, etc.) are recorded to the Points list. Also, boundaries can be set at the position desired (net position, area to avoid, etc.). How to enter a point The point is entered on the screen.
Page 5 Routes A route is comprised of a series of waypoints leading to a destination. Routes are saved to the Routes list. How to create a new route Select [Manual] or [AI Routing]*. Then tap the next point for the route. Repeat this operation to complete the route.
Page 6: Fish Finder
Fish Finder Range buttons Fish Fish Water symbol symbol temp. scale Water temp. graph Bottom Bottom Depth Depth echo echo scale scale Gain A-scope Frequency selection switch Frequency selection switch Depth From top: Requires ACCU-FISH compatible transducer on the network. Unit, Temp.
Page 7: How To Select The Operating Mode
How to select the operating mode How to select the operating mode The fish finder is available in automatic and manual operation. For automatic operation, gain, clutter and TVG are automatically adjusted. Auto mode Open the Layers Manual menu, tap the mode [Fish Finder] tab.
Page 8: Zoom Display
Zoom display Bottom Lock Search for bottom fish. 20.5 200 kHz Open the Layers Bottom Zoom menu, tap the [Fish - Short tail indicates Find bottom contour Finder] tab. soft bottom. and hardness. - Long tail indicates hard bottom. 20.5 Marker Zoom Help determine the size of a school of...
Page 9 Radar North mark North mark Guard zone Guard zone Heading line Heading line Redo, Undo buttons Range Data Data buttons window window Fixed range Ship’s position Ship’s position Range rings How to switch between standby and TX How to switch between standby and TX : TX : Standby (bottom left corner of the screen)
Page 10 How to measure the range, bearing from own ship to an object Object Object Tap an object to show its range and bearing from own ship. How to set a guard zone How to set a guard zone A guard zone alerts you (with aural and visual alarms) when an object (ship, island, reef, etc.) enters the area you specify.
Page 11: Operation
ARPA Operation ARPA is an anti-collision aid that tracks the movement of other ships to help prevent collision. ARPA not only tracks other ships but also provides their navigation data. Targets can be acquired manually, automatically, or both automatically and manually. How to show, hide ARPA symbols ARPA symbols ON ARPA symbols OFF...
Page 12 CPA/TCPA alarm The CPA/TCPA alarm releases an aural alarm and a visual alarm (message in Status bar) when both the CPA and TCPA of a tracked target are equal to or lower than the CPA/TCPA alarm setting. CPA: Closest point of approach TCPA: Time to closest point of approach How to set the CPA/TCPA alarm How to set the CPA/TCPA alarm...
Page 13: Ais Target Symbols
The proximity AIS target alarm releases aural and visual alarms when the distance between own ship and an AIS target is near the alarm value. Home page Set the alarm value, then tap [ ]. How to show AIS target data How to show AIS target data FURUNO FURUNO FURUNO NAVNET FURUNO NAVNET AIS symbol AIS symbol Tap AIS symbol.
Page 14: Instrument Display
Instrument Display With connection of appropriate sensors, the instrument display shows various navigation data. How to enable the instrument display Add the instrument display icon to the home page to show the instrument display. TZT19F Drag After setting, tap [ ]. (Incorporation in multi- screen is also possible.) How to switch instrument displays (ex.
Page 15: Wireless Lan Settings
Wireless LAN Settings You can connect to the internet with the wireless LAN signal to download weather information, update the software, and connect to an iPhone, iPod, iPad, or Android device, to operate and monitor a NavNet TZtouch XL device. How to connect to an existing LAN Connect to the existing LAN to download weather data or update the software.
Page 16 How to create a local wireless network Create a local wireless network to enable operation, monitoring of the TZTtouch XL from a smartphone or tablet. Home page Check that flipswitch is OFF. TZT22X XXXXXXXX Select [Create Local Network]. T Z T 2 2 X TZT22X XXXXXXXX Enter the name of the network, then tap [ ].
Page 20 Pub. No. OSE-45240-D (2406, DAMI) TZT10X/13X/16X/22X/24X/BBX 00020014513 Printed in Japan...

This manual is also suitable for:

Navnet tztouchxl tzt13x Navnet tztouchxl tzt16x Navnet tztouchxl tzt22x Navnet tztouchxl tzt24x Navnet tztouchxl tztbbx

Furuno NavNet TZtouchXL TZT10X Operator's Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Furuno NavNet TZtouchXL TZT10X

Summary of Contents for Furuno NavNet TZtouchXL TZT10X

This manual is also suitable for:

Table of Contents