Care and maintenance
Inserting the water ilter
Information
Place the water ilter into a vessel illed with fresh tap water for a few min-
utes before inserting it.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
»
The menu appears on the display.
2. Navigate to the Care > Filter > Insert ilter menu.
3. Use the arrow buttons to select Start and conirm with "menu/ok".
4. Follow the further instructions on the display.
»
The water hardness is automatically set to Soft.
»
The ready symbol appears on the display.
Changing the water ilter
Change the water ilter when the appliance requests you to do so.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
»
The menu appears on the display.
2. Navigate to the Care > Filter > Change ilter menu.
3. Use the arrow buttons to select Start and conirm with "menu/ok".
4. Follow the further instructions on the display.
»
The ready symbol appears on the display.
Removing the water ilter
The water ilter should not be left standing dry for a long period of time.
When it is not used for a long time, we recommend storing the water ilter
in a vessel illed with tap water in the refrigerator.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
»
The menu appears on the display.
2. Navigate to the Care > Filter > Remove ilter menu.
3. Use the arrow buttons to select Start and conirm with "menu/ok".
4. Follow the further instructions on the display.
»
The water hardness is automatically reset to the previous setting.
»
The ready symbol appears on the display.
92