Table of contents Table of contents For your safety ........................55 Symbols used ......................56 Proper use .........................56 Danger from electric current ................56 Risk of burns and scalds..................57 General safety......................57 Overview of the appliance ....................58 The appliance at a glance ...................58 The control panel at a glance ................60 First steps ..........................61 Unpacking the appliance ..................61 Checking the delivery contents ................61...
Page 3
Table of contents Personal settings – "My Coffee" ..................80 Editing personal user profiles ................80 Selecting/Changing personal settings ............82 Preparing beverages with personal settings ..........83 Changing basic settings ....................84 Setting the language ....................84 Setting the time ......................84 Activating/Deactivating Auto Bean Select ...........85 Setting Auto OFF ....................85 Setting energy save mode ..................86 Resetting the appliance to the factory settings..........87 Displays in the System menu ................87...
Store the operating instructions carefully. If you pass on the appliance, include the operating instructions with it. Melitta accepts no liability for damage caused by failure to observe the operating instructions. If you require further information or have any questions on the appliance, contact Melitta or visit our website at: www.melitta.de...
The appliance is intended for use in private households. Any other use is regarded as improper and may lead to personal injury and material damage. Melitta accepts no liability for damage that arises due to improper use of the appliance.
For your safety ū A defective appliance may only be repaired by an authorised workshop. Do not repair the appliance yourself. ū Do not make any changes to the appliance, its compo- nents or its accessories. ū Do not immerse the appliance in water. Risk of burns and scalds Escaping fluids and steam can be very hot.
Overview of the appliance Overview of the appliance The appliance at a glance Fig. 1: Front left of the appliance 1 Water tank 2 2-chamber bean container 3 Ground coffee chute 4 Cup tray with stainless steel plate (depending on the model) 5 Control panel 6 Height-adjustable outlet with 2 coffee nozzles, 2 milk nozzles, 1 hot water nozzle, cup illumination...
Page 8
Overview of the appliance Fig. 2: Front right of the appliance 10 Cover 11 "Grinding fineness adjustment" lever (behind the cover) 12 Power cable with cable insert compartment 13 Brewing unit (behind the cover) 14 Milk hose connection at the outlet (can be converted to left side) 15 Milk hose connection at the drip tray (possible on both sides) 16 Cup plate 17 Float...
Overview of the appliance The control panel at a glance 09:52 Please select your beverage Fig. 3: Control panel Item Designation Function 18 Direct keys Preparing beverages 19 Espresso Preparing Espresso 20 Café Crème Preparing Café Crème 21 Cappuccino Preparing Cappuccino 22 Latte Macchiato Preparing Latte Macchiato 23 Milk foam/Warm...
First steps First steps This chapter describes how to prepare your appliance for use. Unpacking the appliance CAUTION Contact with cleaning agents can lead to eye and skin irritation. Keep the supplied cleaning agents out of the reach of children. ...
First steps Installing the appliance Observe the following instructions: ū Do not install the appliance in damp rooms. ū Install the appliance on a stable, flat and dry surface. ū Do not install the appliance in the vicinity of sinks or the like. ū...
Page 12
First steps Requirement: The appliance has been installed and connected. 1. Place a vessel beneath the outlet. 2. Switch on the appliance with the ON/OFF button. » The welcome display appears on the appliance. » The request to carry out the setup appears on the display: Please set up the machine.
Basic operation Basic operation This chapter describes basic operating steps for using the appliance on a daily basis. Switching the appliance on and off Before switching on when initially starting up the appliance, read chap- ter 3.5 Switching on the appliance for the first time on page 62. Information ū...
Basic operation Information ū The appliance switches off automatically when it is not operated for a long time. Automatic rinsing is also carried out in this case. ū The off time can be set in the Auto OFF menu, see chapter 8.4 Setting Auto OFF on page 85.
Basic operation Navigating in the menu To set individual beverages and for maintenance and care, you must call up the menu on the display and navigate in the menu. Observe the instructions on the display. Direct keys Espresso Coffee strength Strong Confirm with OK: Fig.
Basic operation Care Exit Rinsing Easy cleaning Cleaning milk system Cleaning coffee system Descaling Filter Fig. 7: Navigating to the Descaling programme 1. Press the "menu/ok" button for 2 seconds. » The menu appears on the display. 2. Use the arrow buttons to select Care and confirm with "menu/ok".
Basic operation The 2-chamber bean container (2) enables the use of two different types of coffee. Auto Bean Select ensures that the best coffee beans are auto- matically selected for various coffee specialities. Espresso-based beverages take their coffee beans from left bean chamber 1 (34), Café Crème-based beverages take them from right bean chamber 2 (35).
Basic operation Fig. 9: Ground coffee chute 1. Open the lid of the ground coffee chute (3). 2. Use the enclosed coffee spoon for dosing. Fill a maximum of one coffee spoon of ground coffee into the ground coffee chute. 3. Close the lid of the ground coffee chute. 4.
Basic operation Fig. 10: Water tank 1. Open the lid of the water tank and pull the water tank (1) upwards out of the appliance by the handle. 2. Fill the water tank with water. Note the maximum capacity of 1.8 litres. 3.
Basic operation Using milk Use cooled milk for optimum coffee enjoyment. Depending on the model, the enclosed milk container or the milk hose and conventional milk packs can be used. Information The connection for the milk hose is installed on the right of the outlet in the factory.
Basic operation Connecting the milk hose (depending on the model) Fig. 13: Connecting the milk hose to the appliance 1. Push down the outlet (6). 2. Connect the milk hose (36) to the connection at the outlet (14). 3. Insert the milk hose into a conventional milk pack (38). Emptying the drip tray and coffee grounds container When the drip tray (8) and the coffee grounds container (7) are full, the appliance requests you to empty them.
Preparing beverages Information The appliance requests you to empty the drip tray and the coffee grounds container after a defined number of beverages have been dispensed. If the containers are emptied while the appliance is switched off, it does not reg- ister this process.
Preparing beverages Preparing Cappuccino Requirement: The ready symbol appears on the display and milk is connected. 1. Place a vessel beneath the outlet. 2. Press the "Cappuccino" button. » The grinding process and coffee dispensing start. » Coffee dispensing is ended automatically. »...
Preparing beverages Preparing milk foam and warm milk The preparation of milk foam and warm milk is similar. Requirement: The ready symbol appears on the display and milk is connected. 1. Place a vessel beneath the outlet. 2. Press the "Milk foam/milk" button. a) Milk foam = briefly press button b) Warm milk...
Preparing beverages Information When selecting a recipe with milk, connect the milk container or a commer- cially available milk pack (depending on the model). Direct starting of recipes is similar for all beverages. The selection of a Lungo is described as an example here. Recipes Exit Espresso...
Preparing beverages Before selecting a beverage, select a bean type with the "BEAN SELECT" button. Before selecting a beverage, use the "Beverage amount" slider to set a beverage amount. Before selecting a beverage, use the "Coffee strength" slider to set the ...
Permanently changing beverage settings Preparing two beverages simultaneously The "2 cups" button is used to prepare two beverages simultaneously. Two- cup dispensing is not possible for the beverages Americano, Long Black, hot water, milk and milk foam. For two-cup dispensing, the appliance carries out two grinding processes.
Permanently changing beverage settings ū Cappuccino: Cappuccino (Standard), Espresso Macchiato, Caffè Latte, Café au Lait, Flat White. ū Latte Macchiato: Latte Macchiato (Standard), Latte Macchiato Extra Shot, Latte Macchiato Triple Shot. Recipe selection is similar for all beverages. The selection of a Ristretto is described as an example here.
Personal settings – "My Coffee" Changing the beverage settings is similar for all beverages. Changing the coffee strength for an Espresso is described here as an example. Direct keys Espresso Coffee strength Strong Confirm with OK: Fig. 18: Setting the coffee strength Requirement: The ready symbol appears on the display.
Page 30
Personal settings – "My Coffee" My coffee --1-- Change name C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Exit Fig.
Personal settings – "My Coffee" Selecting/Changing personal settings Depending on the beverage, the following settings can be assigned to a user: ū Recipes: Selection of recipes, ū Coffee amount: Amount in millilitres ū Foam amount: Amount in millilitres ū Milk amount: Amount in millilitres ū...
Personal settings – "My Coffee" Preparing beverages with personal settings The preparation of beverages using the "My Coffee" function is similar for all beverages. The preparation of a Cappuccino is described here as an example. Requirement: The ready symbol appears on the display and milk is connected.
Changing basic settings Changing basic settings Operating steps that change the appliance's basic settings are described in the following chapter. Setting the language The display text language can be set. Requirement: The ready symbol appears on the display. 1. Press the "menu/ok" button for 2 seconds. »...
Changing basic settings Activating/Deactivating Auto Bean Select Automatic selection of a bean type can be activated/deactivated. Requirement: The ready symbol appears on the display. 1. Press the "menu/ok" button for 2 seconds. » The menu appears on the display. 2. Navigate to the System > Automatic Bean Select menu. 3.
Changing basic settings Setting the point in time for Auto OFF The OFF time point is deactivated as default in the factory. Requirement: The ready symbol appears on the display. 1. Press the "menu/ok" button for 2 seconds. » The menu appears on the display. 2.
Changing basic settings Resetting the appliance to the factory settings The appliance can be reset to the factory settings. Information If the appliance is reset to the factory settings, all personal settings are lost, including the settings in the My Coffee menu. Requirement: The ready symbol appears on the display.
Changing basic settings Setting the grinding fineness The grinding fineness of the coffee beans influences the flavour of the coffee. The grinding fineness has been optimally set prior to delivery. We recommend adjusting the grinding fineness after around 1, 000 beverages have been dispensed (around 1 year) at the earliest.
Changing basic settings Converting the connection for the milk hose The milk hose can be connected on the left or right side of the outlet. Fig. 22: Turning the inlet Proceed as follows to convert the outlet: 1. Pull the milk hose off the appliance. 2.
Care and maintenance Care and maintenance Regular cleaning and maintenance ensure the consistent high quality of your beverages. General cleaning Clean the appliance regularly. Immediately remove external soiling caused by milk and coffee. ATTENTION The use of unsuitable cleaning agents can lead to scratched surfaces. Do not use any abrasive cloths, sponges or cleaning agents.
Care and maintenance Cleaning the brewing unit To avoid damage to the appliance, we recommend cleaning the brewing unit once a week. Fig. 23: Removing the brewing unit Requirement: The appliance is switched off. 1. Open the cover (10). To do this, reach into the recess on the right of the appliance and pull the cover off upwards.
The cleaning programme takes approximately 3 minutes and should not be interrupted. ATTENTION The use of unsuitable milk system cleaning agents can damage the appliance. Only use Melitta® PERFECT CLEAN Espresso Machines milk system cleaning agent.
Care and maintenance Requirement: The ready symbol appears on the display. 1. Place a vessel with a capacity of at least 0.7 litres beneath the outlet (e.g. the coffee grounds container). 2. Press the "menu/ok" button for 2 seconds. » The menu appears on the display.
Contact with coffee machine cleaning agent may lead to eye and skin irritation. Observe the processing instructions on the packaging of the coffee machine cleaning agent. ATTENTION The use of unsuitable coffee machine cleaning agents can damage the appliance. Only use Melitta® PERFECT CLEAN Espresso Machines cleaning tablets. ...
agent. ATTENTION The use of unsuitable descaling agents can damage the appliance. Only use Melitta® ANTI CALC Espresso Machines liquid descaling agent. ATTENTION A water filter may be damaged if it is screwed in during the descaling programme.
Care and maintenance Requirement: The ready symbol appears on the display. 1. Press the "menu/ok" button for 2 seconds. » The menu appears on the display. 2. Navigate to the Care > Descaling menu. 3. Use the arrow buttons to select Start and confirm with "menu/ok". 4.
Care and maintenance Using a water filter The use of a water filter extends the service life of the appliance and the appliance has to be descaled less frequently. The water filter contained in the scope of delivery filters calcium and other pollutants out of the water. Fig.
Care and maintenance Changing the water filter Change the water filter when the appliance requests you to do so. Requirement: The ready symbol appears on the display. 1. Press the "menu/ok" button for 2 seconds. » The menu appears on the display. 2.
Problems Problems If the actions listed below fail to rectify the problems or other problems not listed here occur, contact our hotline (local rate). United Kingdom: +44 (0)800/ 0288 002 Problem Cause Action Coffee only emerges Grinding fineness Set a coarser grinding fineness (see from the outlet in too fine.
Transport, storage and disposal Transport, storage and disposal 11.1 Venting the appliance We recommend venting the appliance when it is not used for a long period, prior to transport and when there is a risk of frost. During venting, residual water is removed from the appliance. Requirement: The ready symbol appears on the display.
Technical data 11.3 Disposing of the appliance Appliances marked with this symbol are subject to the European Directive 2002 / 96 / EC for WEEE (Waste Electrical and Electronic Equipment). Electrical appliances do not belong in domestic waste. Dispose of the appliance in an environmentally friendly manner via ...
Page 51
Technical data Factory settings Espresso Beverage amount * 40 ml Bean type Coffee strength Strong Brewing temperature Normal Café Crème Beverage amount * 120 ml Bean type Coffee strength Strong Brewing temperature Normal Cappuccino Beverage amount * 130 ml Bean type Coffee strength Strong Brewing temperature...
Page 52
Melitta Europa GmbH & Co. KG Division Household Products Ringstr. 99 D-32427 Minden Germany www.melitta.de Editorial department: ZINDEL AG www.zindel.de 0604-0114...
Need help?
Do you have a question about the Caffeo Barista TS and is the answer not in the manual?
Questions and answers