Melitta CaffeO Barista T Operating Instructions Manual page 35

Changing basic settings
ATTENTION
Setting the grinding ineness whilst the grinder is stationary may cause
damage to the grinder.
Only set the grinding ineness whilst the grinder is running.
Fig. 20: Setting the grinding ineness
Requirement: The ready symbol appears on the display.
1. Open the cover (11). To do this, reach into the recess on the right of the
appliance and pull the cover of upwards.
2. Prepare any cofee beverage.
3. Move the lever (12) forwards or backwards whilst the grinder is running.
ū Backwards = grinding ineness coarser
ū Forwards
4. Close the cover. To do this, insert the bottom of the cover into the appli-
ance and swing it up until it engages.
» The ready symbol appears on the display.
Information
The grinding ineness is optimally set when the cofee lows evenly out of
the outlet and a ine, dense crema appears.
84
11
= grinding ineness iner
12