Changing Default Settings - Melitta CaffeO Barista T Operating Instructions Manual

Permanently changing beverage settings
Recipe selection is similar for all beverages. The selection of a ristretto is
described as an example here.
Direct keys
Espresso
Recipes
Exit
Espresso
Ristretto
Lungo
Double Espresso
Double Ristretto
Fig. 16: Recipe selection for ristretto
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the Direct keys > Espresso > Recipes menu.
3. Use the arrow buttons to select Ristretto and conirm with
"menu/ok".
4. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
» When an espresso is next prepared, the ristretto recipe will be used.
6.2

Changing default settings

You can change the following default settings depending on beverage:
ū Cofee amount: in millilitres,
ū Froth amount: in millilitres,
ū Milk amount: in millilitres,
ū Hot water amount: in millilitres,
ū Cofee strength: very mild, mild, normal, strong, very strong,
ū Cofee lavour: Standard, Intense.
Information
The default settings remain valid until they are changed again.
Changing the beverage settings is similar for all beverages. Changing the
cofee strength for an espresso is described here as an example.
76