Operation
To Transmit
To Transmit
Caution!
Be sure the antenna is properly
connected to the radio before
transmitting. Prolonged trans-
mitting without an antenna,
or a poorly matched antenna,
could cause damage to the
transmitter.
Be sure to read the F.C.C. Rules
1
and Regulations included with
Transmit
this unit before transmitting.
PUSH &
HOLD
2
14
29LXHDLE_MANL.indd 14-15
All manuals and user guides at all-guides.com
Select desired channel.
Push and hold mic button to transmit.
Transmitter is now activated. When transmit-
ting, hold the microphone two inches from
your mouth and speak in a clear, normal voice.
Release to receive.
Setting Dynamike®
This controls the microphone sensitivity
(outgoing audio level).
2
3
1.5
NB/ANL
CAL
SWR
ANL
S/RF
RF
SWR
CAL
3
5 7 9
1
SIG
+30dB
3
Initially, set fully clockwise so that maximum
voice volume is available. Dynamike may
have to be reduced in some conditions.
Operation
Setting
Dynamike
TX
RX
M
15
®
9/2/14 3:29 PM