Table of Contents
Advertisement
Operation
Setting Squelch
Continued
Gate set to Desired
Squelch Setting (DSS)
STRONG SIGNALS
MEDIUM SIGNALS
WEAK SIGNALS
3
NOISE
S/RF Meter
S/RF Meter
This meter swings proportionately to the RF
output (outgoing signal) while transmitting.
1
28
29LXHDLE_MANL.indd 28-29
All manuals and user guides at all-guides.com
To achieve the Desired Squelch Setting (DSS),
turn the Squelch control counterclockwise
until you hear noise. Now turn the control
clockwise just until the noise stops. This is the
DSS setting.
The S/RF-SWR-CAL button must be in the
S/RF mode.
External Speaker
The external speaker jack is used for remote
receiver monitoring.
1
Connect an external speaker to the external
speaker jack on the rear panel.
Operation
External Speaker
Note
The external speaker should
have 8-ohm impedance and
be rated to handle at least 4.0
watts. When the external speak-
er is plugged in, the internal
speaker is automatically discon-
nected. See accessory page 41.
Note
Cobra external speakers are
rated at 10 watts.
29
9/2/14 3:29 PM
Advertisement
Table of Contents
